Hi there...

One of the free amigurumi crochet patterns we will share today is the amigurumi tiger, whose photos and design belong to Elena Kuznetsova. You can learn how to crochet these tiger using the free amigurumi pattern. Thanks to Elena Kuznetsova for this cute tiger.

If you don’t know how to often crochet and needles, read our shares. Start your knitting according to the rate you have according to the shape you will make. Shape your toy by increasing and decreasing the point. Once you weave the shape you want to fill the inside of your toy and look at the pictures to decorate.

Amigurumi cats, amigurumi dolls, amigurumi dogs, amigurumi unicorns, amigurumi lambs, amigurumi dinosaurs, amigurumi foxes, amigurumi bears, amigurumi giraffes, amigurumi pigs, amigurumi penguins, amigurumi panda, amigurumi llama, amigurumi bunny, amigurumi clowns, amigurumi elephants, amigurumi hippos, amigurumi monkeys will not be difficult for you…

Amigurumi Cute Tiger Crochet Free Pattern

Designer: Elena Kuznetsova

Materials

• Hook 2
• Eyes 14 mm
• Line
• New yarn for children (acrylic 50 g 200 m) orange 40 g, black 20 g, white 20 g
• Copper wire for tail with a cross section of 1.5 mm 15 cm
• Synthepukh
• Large eye needle

Finished Size: Toys size: Height; 16 cm

Abbreviations

• ch – chain
• sl-st – slip stitch
• sc – single crochet
• hdc – half double crochet
• inc – increase (knit two in one loop)
• dec – decrease (knit two loops with one)
• (…) * – repeat what is indicated in parentheses number of times after *

Body

We start with the body

Redhead

Round 1: Into magic ring 6sc

Round 2: (inc) * 6 = 12

Round 3: (1sc, inc) * 6 = 18

Round 4: (2sc, inc) * 6 = 24

Round 5: (3 sc, inc) * 6 = 30

Round 6: 11sc red, change to black 8sc, change to red 11 sc = 30

Round 7: White 2sc, red 26sc, white 2sc = 30

Round 8: White 2sc, red 2sc, inc, 3sc, inc, 12sc, inc, 3sc, inc, 2sc, white 2sc = 34

Round 9: 3sc white, 5sc red, 18sc black, 5sc red, 3sc white, = 34

The marker goes strictly in the center of the abdomen. If it shifts, align

Round 10: 3sc white, red (1sc, inc) * 2, 20sc, (inc, 1sc) * 2, white 3sc = 38

Round 11: White 4sc, red 30sc, white 4sc = 38

Round 12: White 2sc, inc, 1sc, red 3sc, black 24sc, red 3sc, white 1sc, inc, 2sc = 40

Round 13: White 3sc, inc, 1sc, red 30sc, white 1sc, inc, 3sc = 42

Round 14: White 6sc, red 30sc, white 6sc = 42

Round 15: White 4sc, inc, 1sc, red 3sc, black 24sc, red 3sc, white 1sc, inc, 4sc = 44

Round 16: White 7sc, red 10sc, dec, 6sc, dec, 10sc, white 7sc = 42

Round 17: white 7hdc, red 4hdc, 20sl-st, 4hdc, white 7hdc = 42

Round 18: White 7hdc, red 5hdc, 5sc, dec, 4sc, dec, 5sc, 5hdc, white 7hdc = 40

Round 19: White (2sc, dec) * 2, red 3sc, black 18sc, red 3sc, white (dec, 2sc) * 2 = 36

Round 20: White 6hdc, red 4hdc, 16sl-st, 4hdc, white 6 hdc = 36

Rounds 21-22: White 2hdc, dec, 3hdc, red 4hdc, 4sc, inc, 4sc, inc, 4sc, 4hdc, white, 3hdc, dec, 2hdc = 36

Rounds 23-24: White 7hdc, red 2hdc, 2sc, 14sl-st, 2sc, 2hdc, white 7hdc = 36

Round 25: White 7sc, red 4sc, black 14sc, red 4sc, white 7sc = 36

Round 26: White 7hdc, red 4hdc, 1sc, 12sl-st, 1sc, 4hdc, white 7hdc = 36

Round 27: White (1hdc, dec) * 2, 2hdc, red 3hdc, 1sc, 12sl-st, 1sc, 3hdc, white 2hdc, (dec, 1hdc) * 2 = 32

Round 28: White (1sc, dec) * 2, 2sc, red 1sc, 14sl-st, 1sc, white 2sc, (dec, 1sc) * 2 = 28

Round 29: white (1sc, dec) * 2, 1sc, red 1sc, dec, 8sl-st, dec, 1sc, white 1sc, (dec, 1sc) * 2 = 22

Round 30: White 2hdc, dec, 1sc, red 12sl-st, white 1sc, dec, 2hdc = 20

Rounds 31-35: White 5 sc, red 10sl-st, white 5sc = 20

When stuffing with synthetic fluff, it highlights all the bends and bulges, that is, fill these places denser.

Legs

We start the fingers with white. We knit three pieces, do not break the thread on the third

Round 1: Into magic ring 6 sc

Round 2: (1sc, inc) * 3 = 9

Round 3: 9 sc

Connect your fingers

Round 4: 4sc for the third finger, 5sc for the second, 9sc for the first, 4sc for the second and 5 sc for the third = 27

Round 5: 3sc, dec, 3sc, dec, 7sc, dec, 3sc, dec, 3sc = 23

Round 6: 4sc, dec, 17sc = 22

Change the thread to red

Rounds 7-10: 22sc

Round 11: (3sc, dec) * 4, 2sc = 18

Round 12: 18 sc

Round 13: (1sc, dec) * 6 = 12

Round 14: (dec) * 6 = 6

Pull the hinges

Leg Extension

Further along the foot from the center of the heel in a circle, crocheting between the loops, knit 18 sc.

If you are not familiar with this method, you can dial a chain of 18 ch, close it in a ring and knit in a circle. Then sew to the foot.

The marker runs down the center of the back of the leg. Align.

Round 1: 18 sc

Round 2: jim 3sc, black 12sc, red 3sc = 18

Round 3: Redhead 18sc

Round 4: Black 4sc, red 10sc, black 4sc = 18

Round 5: Redhead 7sc, inc, 2sc, inc, 7sc = 20

Round 6: Red 5sc, black 3sc, inc, 2sc, inc, 3sc, red 5sc = 22

Round 7: Redhead 9sc, inc, 2sc, inc, 9sc = 24

Round 8: jim dec, 20sc, dec = 22

Round 9: Black dec, 7sc, inc, 2sc, inc, 7sc, dec = 22

Round 10: Red dec, 18sc, dec = 20

Round 11: Redhead 20sc

Round 12: Redhead inc, 18sc, inc = 22

Round 13: Black inc, 20sc, inc = 24

Rounds 14-15: Red 24sc

Round 16: Black 7sc, red 10sc, black 7sc = 24

Round 17: jim 24sc

Round 18: (2sc, dec) * 6 = 18

Round 19: (1sc, dec) * 6 = 12

Round 20: (dec) * 6 = 6

Pull off the hinges

Fill the upper part of the thigh loosely, so that when sewn, they do not stick out strongly to the sides. Fill the bottom of the paws tightly, highlighting the back knee with padding polyester.

Arms

Feet fit in the same way as the back.

Round 1: Cast on 20 sc on the heel from the center of the heel

Rounds 2-3: Red 20 sc

Round 4: Black 7sc, dec, 2sc, dec, 7sc = 18

Rounds 5-6: Redhead 18sc

Round 7: Black 18 sc

Rounds 8-9: Redhead 18 sc

Round 10: Black 18 sc

Rounds 11-12: Redhead 18 sc

Round 13: Black 18 sc

Rounds 14-15: Redhead 18 sc

Round 16: Black 18 sc

Round 17: Redhead (3sc, inc) * 4, 2sc = 22

Rounds 18-19: 22sc

Round 20: 1sc, (3sc, dec) * 4, 1sc = 18

Round 21: (1sc, dec) * 6 = 12

Round 22: (dec) * 6 = 6

Pull off the hinges

Embroider claws with one stitch on your fingers

Tail

Black stripes can be made arbitrarily. For example, every 2 rows, as well as on the legs

Round 1: Into magic ring 6 sc

Round 2: (1sc, inc) * 3 = 9

Stuffing along the way is very loose, you can insert the wire and push it deeper into the body.

Rounds 3-28: 9 sc

Round 29: (2sc, dec) * 2, 1sc = 7

Rounds 30-34: 7sc

Leave the thread for sewing.

Sew the tail under the first black stripe

Sew the hind paws to the body, so that the part of the body protrudes above and slightly behind them. Flatten the hips and press them more tightly to the body, secure with needles and sew.

Make sure they are symmetrical.

The front legs are sewn in the same way, but make sure that the feet are level with the hind legs. For convenience, you can pierce one front leg with a knitting needle, then the body and the other leg and put the tiger cub. If it is stable, you can sew on. If not, then you need to correct your legs (raise or lower).

Head

We start with white.

Round 1: Into magic ring 6sc

Round 2: (inc) * 6 = 12

Round 3: (1sc, inc) * 6 = 18

Round 4: (2sc, inc) * 6 = 24

Rounds 5-7: 24 sc

The marker goes down the center of the bottom of the head. In the process of knitting, align the offset loops so that it goes strictly in the center.

Round 8: 4sc, inc, inc, 2sc, (inc) * 8, 2sc, inc, inc, 4sc = 36

Round 9: White 5sc, inc, inc, 3sc, red 1sc, then behind the rear PPs (for the left front PPs we will knit the nose pad) 1hdc, increase hdc, 2hdc, increase hdc, 1hdc, (increase hdc) * 2, 1hdc, increase in hdc, 2hdc, increase in hdc, 1hdc, then for both points 1sc, white, 3sc, inc, inc, 5sc = 46

Round 10: White 6sc, (inc) * 3, 4sc, red 20 hdc, white 4sc, (inc) * 3, 6sc = 52

Round 11: White 7sc, (inc) * 3, 4 sc, red 2sc, 20hdc, 2sc, white 4sc, (inc) * 3, 7sc = 58

Round 12: White 9 sc, (inc) * 3, 4sc, red 3sc, 20hdc, 3sc, white 4sc, (inc) * 3, 9 sc = 64

Round 13: White 18sc, red 4sc, 20hdc, 4sc, white 18sc = 64

Then we knit only red

Rounds 14-20: 64 sc (7 rows)

Round 21: 9sc, dec, 1sc, dec, 36sc, dec, 1sc, dec, 9 sc = 60

Rounds 22-24: 60sc (3 rows)

Round 25: (8 sc, dec) * 6 = 54

Round 26: (7 sc, dec) * 6 = 48

Round 27: (6sc, dec) * 6 = 42

Round 28: (5sc, dec) * 6 = 36

Round 29: (4 sc, dec) * 6 = 30

Round 30: (3 sc, dec) * 6 = 24

Round 31: (2sc, dec) * 6 = 18

Round 32: (1sc, dec) * 6 = 12

Round 33: (dec) * 6 = 6

Pull off the hinges

Pad on the Nose

We knit in rotary rows

Round 1: Kit in the center from the left sts 10 sc

Rounds 2-3: 10 sc.

Round 4: Dec, 6 sc, dec = 8

Round 5: Dec, 4 sc, dec = 6

Sew on after nose tightening.

Nose Tightening

Insert the needle from the bottom of the muzzle between 7 and 8 rows, bring it out above the ka by 3 rows, throw the thread over the top of the muzzle and re-insert the needle from the bottom and up. Tighten.

Sew an overlay on the muzzle on top.

Eye Tightening

Look at the photo.

Insert the needle from the bottom of the head into the first red row, bring it into the eye area (this is the first extra row of hdc and the edge of the bridge on the nose and grab 3 sc to the bridge of the nose) and return back down. Pull off.

The second is similar. Between the eyes 12 hdc

Nose

Black

Round 1: A chain of 4 ch, do not close into a ring and knit in a circle around the chain on both sides inc, 1sc, in one loop 4sc, on the other side 1sc, inc = 10

Round 2: inc, inc, 1sc, (inc) * 4, 1sc, inc, inc = 18

Fold piece lengthwise and work through both sides 9 sc

Sew straight side up, oval down.

Embroider with a thin thread (I took ordinary sewing threads) along the white part of the muzzle of the line

The Lower Part of the Muzzle

White.

Round 1: Into magic ring 6 sc

Round 2: (inc) * 6 = 12

Round 3: (1sc, inc) * 6 = 18

Rounds 4-6: 18sc

Fold over and knit on both sides at once 9 sc. Sew under the muzzle as in the photo. Tinted red inside.

Ears

Let’s start redhead

Round 1: into magic ring 6sc

Round 2: (inc) * 6 = 12

Round 3: (1sc, inc) * 6 = 18

Round 4: White (2sc, inc) * 2, red (2sc, inc) * 4 = 24

Round 5: White (3sc, inc) * 2, red (3sc, inc) * 4 = 30

Rounds 6-9: White 10sc, red 20sc = 30 (4 rows)

Fold the piece in half white in the center and knit on both sides at once 15 sc.

Tie ear in a circle with black hdc

Bend one corner of the ear slightly inward (by about 3sc) and sew on. Sew on the ears.

The lower part of the ear is at the level of the white part, count 3 rows from it and sew the lower part of the ear on 4. Move the upper part of the ear back relative to the bottom by 4 rows. There are 15 rows between the ears.

Finishing Details

Embroider stripes on the head, as in the photo.

Embroider eyebrows.

Glue my eyes. Embroider white on the bottom of the eyes, on top with a black eyelid.

Embroider a highlight on the nose.

Make antennae from the fishing line, attaching like a fringe to a scarf.